Mantua Model
Mantua 8150 Roller-Grip Plank Bender
Fixture / support
Roller-grip plank bender
For wood-plank shaping when rolling the strip is the preferred forming method and the model’s stock is suitable.
- Forming mechanism
- Roller grip
- Target work
- Wooden model-ship planks
- Seller plank preparation
- Warm-water soak 20–30 minutes before rolling
Price info
This is a monthly price snapshot supplied by Rainforest, not a live quote. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon.com at the time of purchase will apply to the purchase of this product.
Choose the option, order and pay on Amazon.
DESCRIPTION
Form the plank before fitting the hull
The 8150 uses a roller-grip approach to creating a bend in a wooden model plank. It is a forming tool, not a tool for cutting the strip to length or trimming its edge. That distinction matters when choosing which operation needs support during hull planking.
The seller’s preparation is specific: soak the plank for 20–30 minutes in warm water, then pass it through the roller-grip bender. After shaping, the seller suggests pinning it to a solid surface and letting it dry before fitting it to the hull. Check your kit’s actual wood and preparation instructions before using that process.
The listing does not supply a maximum strip width, thickness or minimum bend radius. Check the actual plank and model instructions if those dimensions determine the purchase. For holding a strip while trimming, or holding a keel at the bench, the 8155 strip clamp/hull vise performs a different supporting job rather than replacing the roller-forming action.
MODEL DETAILS
Specifications & included parts
| Detail | Product details |
|---|---|
| Forming mechanism | Roller grip |
| Target work | Wooden model-ship planks |
| Seller plank preparation | Warm-water soak 20–30 minutes before rolling |
| Seller post-forming step | Pin to a solid surface and allow to dry before hull placement |
| Model | 8150 |
Check the selected size, working profile and supplied parts on Amazon before ordering.
Where this model is useful
- Roller forming is a distinct operation from cutting or holding the plank.
- The seller describes preparation and drying stages for the model-specific process.
Trade-offs to check
- No maximum strip width, thickness or minimum radius is supplied.
What to check before choosing
Actual plank
Check the stock and kit instructions before applying the listed preparation process.
Your questions about this product
Does it also hold the hull while I work?
Its described task is rolling a bend into a plank. Mantua 8155 is the separately described strip clamp and keel-holding vise.
What sequence does the seller describe for 8150?
Warm-water soak for 20–30 minutes, roll the plank, then pin it to a solid surface and allow it to dry before fitting it to the hull. Check the actual wood and kit instructions first.
Can I choose it for a specified bend radius?
No minimum radius or maximum stock section is supplied in this listing. Confirm suitability for the actual plank rather than using parcel dimensions as a forming capacity.
Other options to consider
Choose the roller tool to form the curve of a model plank. Mantua8155 holds a strip or keel during work and performs a separate supporting operation.
About this product information
Choice guidance compares the model’s stated working shape, materials, dimensions and supplied components.
Selected Amazon listing ↗ · Listing checked 2026-11-06 · Information reviewed 2026-11-06
Confirm the current variation and supplied parts on Amazon before ordering.